If your tyre is worn out, cut or you just fancy some new rubber, grab some tyre levers and let us quickly explain how to change an ebike tyre
Remove your Tyre
Deflate your tyre as much as possible.
Remove the wheel from your bike.
Go around the tyre and pinch either side of the bead into the centre of the rim. This is an important step.
Pop a tyre lever under the tyre bead and lever it over the edge of the rim. At this point you may be able to slide the lever around the bead to unseat the tyre or you may need another lever to lever a bit more bead off first.
When one side of the tyre is off the rim you can take out your inner tube. If you are running tubeless the sealant will leak at this point
Lever the other side off and then you should be able to separate the rim and tyre by hand.
Fitting Your Tyre
Paying attention to the tread direction of your tyre (if applicable), fit one side of the tyre bead onto the rim. The last bit may need a tyre lever. Make sure the bead is in the centre of the rim
Refit your inner tube and tuck it in between the tyre and rim
Working from the top of the tyre, tuck the remaining bead onto the rim and work down either side of the rim simultaneously with your fingers stretching the tyre as much as you can tucking the bead as you go. Supple tyres may go on at this point
If you can't get the bead on with your fingers, check the other bead is still central, check the inner tube is not trapped between the tyre and outside of the rim. Invert your tyre lever and push it gently in between the tyre bead and outside of the rim and lever it up while pushing it onto the rim with your thumb
When the tyre is on, check both beads are central and check that the inner tube isn't pinched between the bead and the rim
At this point you can add sealant (if applicable)
Pump your tyre carefully for the first few psi then pump it up to the required pressure
